Locations · Australind, WA
Sandblasting Australind
Greater Bunbury living — trailers, machinery, sheds, masonry and boats, blasted on your block.
Blasting in Australind
Australind and Eaton sit between Bunbury industry and the Leschenault estuary, so the work is a mix: domestic masonry and driveways, trailers and machinery on the larger blocks, and boats and trailers off the water.
Everything needed is on the truck, so we work on a driveway, shed slab or paddock without drawing on your services.
Areas covered: Australind, Eaton, Leschenault, Binningup, Brunswick Junction, Harvey, Dardanup, Bunbury
In short
Australind is part of our regular Bunbury run. Domestic masonry, trailers, machinery, boats and fleet work all off the same mobile rig, with the mess contained and removed. Call 0458 531 878.
What we blast around Australind
Domestic masonry and concrete. Painted brick, limestone, render, alfresco areas and driveways — including exposed-aggregate finishes. See construction sandblasting.
Trailers and machinery. Box trailers, tippers, implements, ride-ons and shed steel back to sound metal and recoated. See transport sandblasting.
Marine. Anti-foul and coatings off hulls, plus trailers and running gear. See marine sandblasting.
Mobile or workshop
Most work here is on the property. Removable items can come to the workshop, and we group South West trips where timing allows.
Getting to Australind
Australind sits at the top of the Leschenault estuary, twenty minutes north of Bunbury, and we treat it as part of the same South West run. Regional trips are batched rather than made one job at a time, so if your timing is flexible you get a better rate and a sooner start by going into a trip that is already planned.
The mix here is estuary and semi-rural: boats and trailers, farm and property gear off the blocks inland, plus light industrial work out towards Kemerton. Estuarine air is not as harsh as open coast, but it is salt-bearing, and it shows up as rust bloom under coatings that were never prepared properly.
Services available in Australind
Automotive sandblasting
Panels, chassis, trays and full shells taken back to bare metal without warping the steel.
Marine sandblasting
Anti-foul, rust and failed primer off hulls, keels and running gear.
Construction sandblasting
Painted brick, limestone, render, concrete and timber stripped back on site.
Transport sandblasting
Trucks, trailers, ute trays and tankers prepped for repaint or new livery.
Manufacturing sandblasting
Mill scale off plate, pipe spools and weldments, blasted to profile and primed.
Graffiti removal
Tags off brick, render, limestone and steel without ghosting.
Australind questions
Working in Australind
Do you cover Australind and Eaton?
Yes, both sit inside our regular Bunbury run. Travel is quoted with the job.
Can you blast on a rural block?
Yes. The rig carries its own water, air, abrasive and containment, so no services are needed from you.
Can you strip and recoat a trailer?
Yes — blasted back to sound steel, then primed and coated. Doing both means the coating goes on inside the window.
How much notice do you need?
For South West work, as much as you can give. We batch regional trips, which keeps the travel component down.
Do you charge travel to Australind?
Australind falls into our South West runs alongside Bunbury. Travel is shared across the jobs in a trip, so booking into an existing run costs less than calling us down for a single item.
Can you work at a property inland from Australind?
Yes. The rig carries its own water, power and containment, so a farm shed or a level patch of yard is enough. Let us know access for a vehicle and trailer.